Mai tattara iskar oxygen na gida AMZY30|Medsinglong

Cikakken Bayani

Sabbin ayyuka:
1.High taro
2.Ci gaba da samar da iskar oxygen
3.Oil free compressor
4.Tabawa hankali
5.Babban nunin allo
6.Double oxygen inhalation
7. Sautin murya
8.Amo rage ƙira
9.Shigo da sikelin kwayoyin halitta
10.Tsarin tacewa
11.Ajiye wutar lantarki da adana makamashi

Marufi & Bayarwa

Ƙayyadaddun bayanai

Sabbin ayyuka:

1.High taro
2.Ci gaba da samar da iskar oxygen
3.Oil free compressor
4.Tabawa hankali
5.Babban nunin allo
6.Double oxygen inhalation
7. Sautin murya
8.Amo rage ƙira
9.Shigo da sikelin kwayoyin halitta
10.Tsarin tacewa
11.Ajiye wutar lantarki da adana makamashi

Siffofin samfur
Nauyin samfurin: 6kg
Oxygen fitarwa: 1L-7L
Gudun amo≤ 60db
Ƙarfin shigarwa ≤ 120VA
Yawan Oxygen: 35-93%
Girman samfur: 27*20*39cm
Ƙimar ƙarfin lantarki: AC220+15V 50+1HZ

Kariya don amintaccen amfani

Lokacin amfani da wannan samfur, da fatan za a kiyaye waɗannan ka'idodin aminci:
1.Oxygen is a kone-support gas, ba a yarda a yi amfani da oxygen janareta a cikin wani yanayi tare da haske ko duhu tushen wuta ko tare da flammable ko fashewa hatsari.An haramta shan taba sosai kusa da iskar oxygen.
2.Ba a yarda a sanya bututun iskar oxygen a ƙarƙashin shimfidar gado ko matashin wurin zama ba.lokacin da babu iskar oxygen, kashe wutar lantarki na janareta oxygen.
3.The wutar lantarki dole ne hadu da bukatun ga aminci amfani da wutar lantarki.idan wutar lantarki ba ta cika buƙatun ba, kar a yi amfani da janareta na iskar oxygen .
4.Don Allah a kashe wutar lantarki kuma cire filogin wutar lantarki, kafin tsaftacewa, kiyayewa ko maye gurbin bututun aminci na janareta na oxygen.
5. Yin amfani da igiyar wuta da filogi mara kyau na iya haifar da kuna ko wasu haɗarin girgiza wutar lantarki.kar a yi amfani idan igiyar wutar lantarki ta lalace .Don guje wa haɗari, dole ne a maye gurbinsa da ƙwararren mai izini daga masana'anta .Cire filogin wutar lantarki.
6.Don Allah a zaɓi amintaccen soket da ƙwararrun soket da allon wayoyi tare da amintaccen lantarki.
7.An haramta toshewa ko cire wutar lantarki da hannayen rigar.An haramta ja injin ta hanyar bututun iskar oxygen ko layin wutar lantarki.
8.Ma'aikatan da ba su da izini daga kamfanin ba za su cire murfin don kiyayewa ba.

Amfani da muhalli
Yanayin yanayi: 10 ℃ ~ 40 ℃
Siffofin Samfur
AMZY30 janareta na iskar oxygen yana ɗaya daga cikin jerin samfuran da kamfaninmu ke samarwa.Samfurin yana amfani da sieve kwayoyin halitta azaman adsorbent, yana amfani da ka'idar ci-gaban matsa lamba (PSA), kuma yana amfani da iska azaman albarkatun ƙasa don samar da iskar oxygen ta hanyar zahiri.Siffofin masu zuwa:
1) Ana ɗaukar iska daga yanayi.
2) Karɓar fasahar tallan matsa lamba mai ƙarfi (PSA), kwararar tsari da ƙarancin kuzari.
3) Samfurin yana da ƙirar ƙirar ƙira, aiki mai sauƙi, aiki mai ƙarfi da kulawa mai dacewa.

Dangantakar zafi: 30% ~ 75%
Matsin yanayi: 86.0kPa ~ 106.0kPa
220-240V (+5/-10V)
Mitar wutar lantarki: 50Hz ± 1Hz

Yanayin aiki
Najasa a cikin ɗanyen iska ≤ 0.3 mg / cm 3
Abun mai a cikin iska ≤ 0.01 ppm
Ya kamata muhallin da ke kewaye ya kasance ba tare da gurbataccen iskar gas da kuma filaye masu ƙarfi ba

Siffofin samfur:
Yanayin nuni: nunin bututu na dijital, haruffan Ingilishi
Ayyukan lokaci na ci gaba da tafiyar lokaci, lokacin tafiyar lokaci, tara lokaci ta atomatik

Ayyukan atomization:
Ayyukan sarrafawa mai nisa: aikin sarrafa ramut infrared

Alamun fasaha:

Oxygen maida hankali: (lokacin da kwarara≤1 lita) 90 ± 3% (v / v)
Abubuwan da ke cikin Carbon dioxide ≤0.01% (v / v)
Kamshi mara wari
Girman barbashi mai ƙarfi ≤10um
Abun ciki mai ƙarfi ≤0.5mg/m 3

Alamomin fasaha na samfur:
Matsakaicin daidaitawa (1 ~ 7 L / min) daidaitacce
Gudun amo ≤60dB (A)
Kuskuren lokaci ≤ ± 3%
Ƙarfin shigarwa: 150W
Nauyin inji kamar: 6kg
Girman bayani: 390 × 270 × 200 mm

Shigarwa

1) Kafin amfani, sassauta (ko zana) madaurin Velcro na kasa don guje wa injin damfara mai aiki a cikin yanayin girgiza.
2) Ƙara ruwa zuwa mai humidifier: Kashe wutar janareta na iskar oxygen, sanya yatsanka a kan yatsu na humidifier, kuma a hankali cire humidifier.Fitar da filogin silicone mai cike da ruwa a kan humidifier, Mazugin allurar ruwan da aka kawo ana shigar da shi a cikin ramin allurar ruwa, kuma ana zuba ruwan da ya dace na ruwa mai tsafta a cikin kofin humidification ta cikin mazurari (matakin ruwa kada ya wuce mafi girma). layin ruwa).Fitar da mazurari, toshe filogin silicone na allurar ruwa a ramin allurar ruwa, sannan a saka kofin humidification Baya.