Mai ɗaukar nauyin oxygen mai ɗaukar nauyi AMZY33

Cikakken Bayani

Siffofin masu zuwa:
1) Ana ɗaukar iska daga yanayi.
2) Karɓar fasahar tallan matsa lamba mai ƙarfi (PSA), kwararar tsari da ƙarancin kuzari.
3) Samfurin yana da ƙirar ƙirar ƙira, aiki mai sauƙi, aiki mai ƙarfi da kulawa mai dacewa.

Marufi & Bayarwa

Ƙayyadaddun bayanai

Siffofin samfur:

AMZY33 janareta na iskar oxygen yana ɗaya daga cikin jerin samfuran da kamfaninmu ke samarwa.Samfurin yana amfani da sieve kwayoyin azaman adsorbent, yana amfani da ka'idar ci-gaban matsa lamba (PSA), kuma yana amfani da iska azaman albarkatun ƙasa don samar da iskar oxygen ta hanyar zahiri.Siffofin masu zuwa:
1) Ana ɗaukar iska daga yanayi.
2) Karɓar fasahar tallan matsa lamba mai ƙarfi (PSA), kwararar tsari da ƙarancin kuzari.
3) Samfurin yana da ƙirar ƙirar ƙira, aiki mai sauƙi, aiki mai ƙarfi da kulawa mai dacewa.

Kariya don amintaccen amfani:

Lokacin amfani da wannan samfur, da fatan za a kiyaye waɗannan ka'idodin aminci:
1.oxygen is a kone-support gas, ba a yarda a yi amfani da oxygen janareta a cikin wani yanayi tare da haske ko duhu tushen wuta ko tare da flammable ko fashewa hatsari.An haramta shan taba sosai kusa da iskar oxygen
2.Ba a yarda a sanya bututun iskar oxygen a ƙarƙashin shimfidar gado ko matashin wurin zama ba.lokacin da babu iskar oxygen, kashe wutar lantarki na iskar oxygen janareta.
3.The wutar lantarki dole ne hadu da bukatun ga aminci amfani da wutar lantarki.idan wutar lantarki ba ta cika buƙatun ba, kar a yi amfani da janareta na iskar oxygen .
4.Don Allah a kashe wutar lantarki kuma cire filogin wutar lantarki, kafin tsaftacewa, kiyayewa ko maye gurbin bututun aminci na janareta na oxygen.
5. Yin amfani da igiyar wuta da filogi mara kyau na iya haifar da kuna ko wasu haɗarin girgiza wutar lantarki.kar a yi amfani idan igiyar wutar lantarki ta lalace .Don guje wa haɗari, dole ne a maye gurbinsa da ƙwararren mai izini daga masana'anta .Cire filogin wutar lantarki.
6.Don Allah a zaɓi amintaccen soket da ƙwararrun soket da allon wayoyi tare da amintaccen lantarki.
7.An haramta toshewa ko cire wutar lantarki da hannayen rigar.An haramta ja injin ta hanyar bututun iskar oxygen ko layin wutar lantarki.
8.Ma'aikatan da ba su da izini daga kamfanin ba za su cire murfin don kiyayewa ba.

Amfani da muhalli
Yanayin yanayi: 10 ℃ ~ 40 ℃
Dangantakar zafi: 30% ~ 75%
Matsin yanayi: 86.0kPa ~ 106.0kPa
220-240V (+5/-10V)
Mitar wutar lantarki: 50Hz ± 1Hz

Yanayin aiki:
Najasa a cikin ɗanyen iska ≤ 0.3 mg / cm 3
Abun mai a cikin iska ≤ 0.01 ppm
Ya kamata muhallin da ke kewaye ya kasance ba tare da gurbataccen iskar gas da kuma filaye masu ƙarfi ba

Siffofin samfur:

 
Yanayin nuni: nunin bututu na dijital, haruffan Ingilishi
Ayyukan lokaci na ci gaba da tafiyar lokaci, lokacin tafiyar lokaci, tara lokaci ta atomatik
Ayyukan atomization
Ayyukan sarrafawa mai nisa: aikin sarrafa ramut infrared

Alamun fasaha

Oxygen maida hankali (lokacin da kwarara≤1 lita) 90 ± 3% (v / v)
Abubuwan da ke cikin Carbon dioxide ≤0.01% (v / v)
Kamshi: Mara wari
Girman barbashi mai ƙarfi ≤10um
Abun ciki mai ƙarfi ≤0.5mg/m 3

Alamomin fasaha na samfur:
Matsakaicin daidaitawa (1 ~ 7 L / min) 可调
Gudun amo ≤60dB (A)
Kuskuren lokaci ≤ ± 3%
Ƙarfin shigarwa: 150W
Nauyin inji: kusan 6kg
Girman zane: 274 × 174 × 342mm

Cire kaya:
Bude akwatin daga saman akwatin, cire kumfa, buɗe jakar filastik, ja hannun murfin baya, kuma fitar da janareta na iskar oxygen.

Dubawa:
Da farko duba janareta na iskar oxygen don lalacewar sufuri, sannan duba kayan haɗi da takaddun bazuwar bisa ga lissafin tattarawa.

Shigarwa:
1) Kafin amfani, fara sassauta madaurin Velcro na ƙasa don guje wa girgizar damfarar iska.
2) Ƙara ruwa zuwa Kofin humidification: a gaban janareta na oxygen, a ratar baka, mika yatsan yatsa a cikin kofi na humidification, sa'an nan kuma zazzage kofin humidification, cire filogin silica gel, ƙara ruwa mai tsabta (the matakin ruwa ya kamata ya zama ƙasa da mafi girman matakin ruwa) a cikin kofin, sa'an nan kuma toshe kofin humidification baya cikin ramukan iska guda biyu na murfin gaba.