H7c82f9e798154899b6bc46decf88f25eO
H9d9045b0ce4646d188c00edb75c42b9ek

Igwe X-Ray eze na-enweghị ikuku Digital Dental-X-ray

Nkọwa dị mkpirikpi:

Mgbanwe, nchekwa, ntụkwasị obi na nkwụsi ike

Nhazi zuru oke nke onwe iji mepụta onyonyo nkọwa dị elu.

Ogwe aka rotary kwụsiri ike, n'ọnọdu a pụrụ ịdabere na ya, na-adịgide adịgide.

Ụdị mgbidi a na-agbanye mgbidi nwere atụmatụ nchekwa dị ịrịba ama iji gboo mkpa nke ụlọ ọgwụ na-echekwa ohere na ndị ọrịa.

Ọ bụrụ na microchip na-arụ ọrụ achọpụta mmejọ, ngụ oge na-akwụsị ikpughe ozugbo.

 


  • Ike kachasị:900VA
  • A na-elekwasị anya na redio:0.8mm
  • Ugboro:50/60Hz
  • Anodal akụkụ:19°
  • Oge mkpughepu:0.06 ~ 2.00 nkeji
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Igwe X-Ray eze na-enweghị ikuku Digital Dental-X-ray
    Nkọwa ngwaahịa

    Nledo anya n'otu n'otu, enwere ike nweta onyonyo doro anya n'ụzọ dị mfe:

    A na-ebubata mgbawa microcomputer na akụrụngwa eletrọnịkị dị mkpa, yana njikwa ikpughe microcomputer nwere ọgụgụ isi.Akara ka kaadị ule, ya mkpebi ruru mba elu larịị nke yiri ngwaahịa.

    Radieshon dị ala, enweghị nchekasị maka ọrụ foto:

    Obere isi X-ray na aka uwe bọlbụ ka ejiri efere ndu mechie nke ọma.N'okpuru ọnọdụ nke ikpughe oghere, ụzarị ọkụ na-agbapụta bụ 68 ugboro dị ala karịa ọkọlọtọ mba na 0.5MGy / h (0.03Gy / h) n'okpuru uru nchekwa nkịtị na anya nke 1.0 m site na etiti irradiation.A na-echekwa ahụike nke ma dọkịta na onye ọrịa na-enweghị mkpa maka ụlọ X-ray.

    Arụmọrụ na-agbanwe agbanwe, nkwụsi ike na ọnọdụ agbapụ nke ọma:

    Njikwa oge ziri ezi, teknụzụ microprocessor ga-abụ oge mkpughe ziri ezi na narị otu narị sekọnd, ihe ngosi dijitalụ, na mkpu ọ bụla nwere ike inye ịdọ aka ná ntị ziri ezi ozugbo.

    a
    Nkọwapụta
    b
    ihe nlereanya
    AMDX15
    Ike
    AC 220V± 10%
    Socket
    internalthree-pin/European atọ-pin
    Ike kachasị
    900VA
    Enyere ugbu a
    4A
    Fuse
    6.3A
    Nleba anya radieshon
    0.8mm
    Tube-isi voltaji
    70kV± 10%
    Anodal ugbu a
    7mA±15%
    Anodal akụkụ
    19°
    Na-ebu okirikiri
    1/60
    oyi akwa ọkara uru
    70kV 1.6mmAl
    Mgbapụta radieshon
    <0.007mGy/h
    Filtration dị n'ime
    > = 2.1mmAI
    Oge mkpughepu
    0.06 ~ 2.00 nkeji
    agba
    nwa, ọcha, akwụkwọ ndụ akwụkwọ ndụ

    Atụmatụ

    1. Nabata igwe ọkụ X-ray agbakọtara ebubata
    2. Njikwa oge ziri ezi: microprocessing nwere ike ime ka oge ikpughe ziri ezi na 1/100 sekọnd ma gosipụta na dijitalụ.Igwe ahụ ga-emegharị ọkụ ọ bụla ozugbo.
    3. Ogwe nguzozi nke French na-ebubata na-eme ka ọnọdụ ahụ gbanwee ma kwụsie ike.
    4. A na-eji kọlụm aluminom mee ka kọlụm, nhazi oge a na nke a nụchara anụcha
    5. Parallel lekwasịrị anya, na-enye aka iji nweta ihe oyiyi doro anya dị mfe
    6. N'ihe fọrọ nke nta ka ọ bụrụ enweghị radieshon, ọ dị mma iji rụọ ọrụ: obere isi iyi X ray na aka bọọlụ ka akpọchiri nke ọma.Na ọnọdụ nke meghere ikpughe, gburugburu 1 mita site na ikpughe center, ya ray leakage ala karịa mba ụkpụrụ site 68 ugboro, karịa ihe ahụ nchekwa uru nke 0.5mGy / h bụ ala (0-0.007mGy / h).Yabụ na enweghị ụlọ nchekwa X-ray, ndị dọkịta na ndị ọrịa nwekwara ike ichekwa nke ọma.
    7. na ọrụ ngosi koodu njehie, parampat nwere ike ịtọgharịa na chekwaa
    8. Voltage stabilizer dị ka ọkọlọtọ collocation, na-egbochi mmebi site na ịchụ nta voltaji, nke nwere ike ime ka ndụ ọrụ nke igwe a.
    9. Ọnọdụ igwefoto dijitalụ echekwara, nke nwere ike kwalite na igwe na-emepe emepe dijitalụ.

  • Nke gara aga:
  • Osote:

  • Hapụ ozi gị:

    Dee ozi gị ebe a ziga anyị ya.

    Hapụ ozi gị:

    Dee ozi gị ebe a ziga anyị ya.