Lintlha tse Potlakileng
Amorphous silicon TFT/PD matrix panel
Scintillator CsI (TI)
Pixel bophahamo ba 85µm
Sebaka se sebetsang hantle 235mm x 290mm
Matrix a pixel a sebetsang > 2762 x 3408
AD phetoho ea 16bit
Morekisi oa phaello o ka khonehang
Matla a fapaneng ke 25kV-40kV
AED Trigger mode Software
Packaging & Delivery
Lintlha tsa ho paka:Sephutheloana se tloaelehileng sa ho romelloa kantle ho naha Lintlha tsa thomello: nakong ea matsatsi a 7-10 a mosebetsi ka mor'a ho fumana tefo |
Litlhaloso
Breast Flat Panel Detector AMFP30 ea rekisoa|Medsinglong
1.Selelekela
TheAMFP30ke sesebelisoa sa dijithale sa FPD se nang le sensor ea Amorphous Silicon TFT e nang le patented le linale tse kentsoeng ka kotloloho CsI: Tl scintillator mokhoa oa theknoloji ea iRay.It e entsoe ka moralo o kopaneng molemong oa ho khutlisetsa sistimi ea mammography ea analog ho dijithale.AMFP30e na le sebaka se seholo se sebetsang sa 24x30cm se nang le 85μm pixel pitch.CsI e sebetsang (Cesium Iodide) scintillator etsa the AMFP30 finyella a khethehileng hodimo DQE le MTF.Sesebelisoa se fana ka ts'ebetso ea AED (Auto Exposure Detection) ka sensor e khethehileng ho bona X-ray bakeng sa ho kenya tšebetsong FPD, hape e tsamaisana le mosebetsi o teng oa AEC oa sistimi ea analog mammography.AMFP30e tšehetsa FFDM lits'ebetso.
- Mokhoa o Akaretsang Litlhaloso
Theknoloji ea sensor | Amorphous silicon TFT/PD matrix panel |
Scintillator | CsI (TI), linale tse kentsoeng ka kotloloho ho phanele ea a-Si TFT |
Sekhahla sa pixel | 85µm |
Sebaka se sebetsang se sebetsang | 235mm x 290mm |
Matrix ea pixel e sebetsang | >2762 x 3408 |
AD phetoho | 16 hanyane |
Ntlafatsa amplifier | Morekisi oa phaello o ka khonehang |
Lethathamo la matla | 25kV-40kV |
DataControl interface |
GigE |
Mokhoa oa ho qala | Software, AED |
Mosebetsi oa AED | Ee |
Sekhahla sa foreimi | 2fps@Matha mahala |
Nako ea potoloho | E tloaelehileng ea 15s |
- Boleng ba Litšoantšo
Qeto e fokolang ea sebaka | 6 lp/mm |
Lethal dose la saturation* | Tloaelehileng 2500μGy @ 7.2pC |
Dynamic range* | >76dB @ 7.2pC |
QNED (e lekantsoe ho latela European Guidelines) |
FFDM: ≤20µGy @ Binning 1C |
QNLD (e lekantsoe ho latela European Guidelines) |
FFDM: ≤80µGy @ Binning 1C |
Linearity* | ≥ 0.999 |
MTF* @ RQM1/Binning1C (e lekantsoe ho latela IEC62220-1-2) | E tloaelehileng 90% @ 1.0 LP/mm E tloaelehileng 70% @ 2.0 LP/mm E tloaelehileng 58% @ 3.0 LP/mm E tloaelehileng 29% @ 5.0 LP/mm |
DQE* @ RQM1/Binning1C (e lekantsoe ho latela IEC62220-1-2) | E tloaelehileng 69% @ 0 LP/mm E tloaelehileng 65% @ 1.0 LP/mm E tloaelehileng 56% @ 2.0 LP/mm E tloaelehileng 45% @ 3.0 LP/mm E tloaelehileng 31% @ 5.0 LP/mm |
Lag (e lekantsoe ho latela IEC62220-1-2) |
<1.5% (foreimi ea pele) |
Phello ea memori | <0.3%, kamora 60s |
(e lekantsoe ho latela IEC62220-1-2) |
|
CNR @ 45mm PMMA | ≥ 12,5 |
Homogeneity ea receptor ea setšoantšo (e lekantsoe ho latela European Guidelines) |
<10% |
ACR phantom @ boemo ba bongaka | ≥ 4 likhoele ≥ 4 boima ≥ lihlopha tse 3 tsa li-speck |
Lehlakore la lebota la sefuba le lahlehang | <3 limilimithara |
*: Boleng ba mahlaseli ke W/Rh (50µm), ho latelaIEC62220-1-2:2007.
- Mechini
Boima ba 'mele | ≤1.3kg |
Thepa ea matlo | Aluminium e nang le fensetere e kenang ea carbon fiber laminate |
Boholo (mm3) | 327 (L) × 254.5 (W) × 14 (H) |
Kemiso |
|
- Lipuisano
Sehokelo sa data | GigE |
Sehokelo sa khokahano sa X-ray | AED |
Software | SDK, e tšehetsang 32 le 64 Windows®OS |
- Tikoloho le Ho tšepahala
Mocheso | 10 - 40 °C (e sebetsa), -10 - 55 °C (bobolokelo) |
Mongobo | 10 - 90% RH (e sebetsang, e sa fokotseng) 10 - 95%RH (bolokelo) |
Khatello | 700 - 1060mbar (ts'ebetso le polokelo) |
Ho thothomela | IEC 60068-2-6 (10-200 Hz, 5 g) |
Ho tshoha | IEC 60068-2-29 (16ms, 10 g) |
Bophelong | 5 lilemo |
Tekanyetso ea nako ea bophelo | 300Gy e tloaelehileng |
IBFR | ≤ 2.5% |
CFR36 | ≤ 7.5% |
- Matla
Phepelo | 100-240V AC le maqhubu a mains a 50Hz le 60Hz, ka bobeli +/- 2%. |
Kenyeletso | 24V DC |
Phatlalatso | Hoo e ka bang 18W |
Ho phodisa | Feseha |
- Taolo
Taolo e akaretsang | CE, RoHs |
Tsamaiso ea kotsi | ISO 14971: 2007 |
Tšireletseho le ts'ebetso ea bohlokoa bakeng sa mance | IEC60601-1: 2005/EN60601- 1:2006+AC:2010/IEC 60601-1:2005+ Phetoho 1: 2012 / EN 60601-1: 2006+ Phetoho 1:2013 IEC 60601-1-2:2014 |
Tšireletso ea mahlaseli | IEC 60601-1-3:2008 |
Litšobotsi tsa lisebelisoa tsa litšoantšo tsa X-ray tsa dijithale | IEC 62220-1-2:2007 |